 |
Used a blade, design for minimize a tolerance Design for overload protection circuit |
| DC Voltage | 10 ~ 1000V |
| DC Current | 2.5 ~ 1000V |
| AC Voltage | 2.5㎃ ~ 10A |
| Resistance | 0 ~ 20㏁ |
| Battery | 9V × 1, AA (1.5V) × 2 |
 |
Dual integration mode 3 3/4 Digital LCD max. reading of approx 4000 Auto ranging, Auto power off |
| Sampling | 2times/s |
| Size | 54×108×12mm |
| DC Voltage | 0~450V |
| AC Voltage | 0~450V |
| Ohms | 0~40MΩ |
| Continuity | Less than 50Ω |
| Coutinuity | 400Ω |
| Battery | Lithium 1.5V × 2 |
 |
Dual integration mode 3 1/2 Digital LCD max. reading of approx 2000 Auto ranging, Auto power off |
| Size | 195×65×27.5mm |
| DC Voltage | 200mV~1000V |
| AC Voltage | 200mV~750V |
| Ohms | 200Ω~20MΩ |
| Battery | Lithium 3V × 3 |
 |
Dual integration mode 3 3/4 Digital LCD max. reading of approx 4000 Auto ranging, Auto power off |
| Size | 190×69×24mm |
| DC Voltage | 400m/4/40/400/600V, ± (1.2%+5) |
| AC Voltage | 400A/600A,± (2.0%+3) |
| DC Current | 400A/600A,± (1.5%+3) |
| AC Current | 400/4K/40K/400K/4MΩ,± (1.0%+3) |
| OHM | 10Hz to 1MHz ± (0.1%+3) |
| Frequency | Open voltage: 1.5V; Test current:0.6mA |
| Diode Check | Buzzer sounded when resistance less than 30Ω |
| Continuity Check | Lithium 3V × 3 |
 |
Dual integration mode 3 1/2 Digital LCD max. reading of approx 2000 Auto ranging, Auto power off |
| Size | 180×87×50mm |
| AC/DC Voltage | 200mV~1000V |
| DC/AC Current | 200uA~10A |
| Ohms | 200Ω~20MΩ |
| Clamp | 200A~1000A |
| Diode | Continuity Buzzer Less than 50Ω |
| AC CLAMP CORE | CLAMP METER Function |
| Battery | AAA (1.5V) × 2 |
|
Dual integration mode 3 3/4 Digital LCD max. reading of approx 4000 Auto ranging, Auto power off |
| Size | 180×87×50mm |
| DC Voltage | 400mV~1000V |
| AC Voltage | 200uA~10A |
| Ohms | 400Ω~40MΩ |
| Capacitance | 40.00nF~100μF |
| Frequency | 40Hz~10MHz |
| Duty | 0.1%~99.9% |
| Temp Battery | -20℃~800℃ AAA (1.5V) × 2 |
 |
Dual integration mode 3 1/2 Digital LCD max. reading of approx 2000 Auto ranging, Auto power off Engine analyzer |
| Size | 80×87×50mm |
| AC/DC Voltage | 200mV~1000V |
| Ohms | 200Ω~20MΩ |
| Temp | -20℃~1000℃ / -4℉~1832℉ |
| Dweel | 3CYL~8CYL |
| Tach | 3CYL~8CYL |
| Battery | AAA (1.5V) × 2 |
 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Test the temperature of soldering iron precisely and quickly. Fast, accurate tip temperature measurement using a fine CA wire sensor. Large easy-to-read digital temperature display. The sensors are easy to alternate. Wide range of temperature testing 0~600℃. |
 |
Precise, quick and convenient to test the grounding system. There's no limits on where and when to test. Very useful in the electronic industry. |
| Indicators | Reisit. Calibration |
| Low(Red) | R＜800 KW |
| Good(Green) | 800KΩ≤R≤9 MΩ |
| High(Red) | R＞9 MΩ |